How To Use The Burning Technique For Tree Stump Removal In Cabramatta?

If you are dealing with a tree stump removal in Cabramatta for the first time in life, it can really be hectic for you. Though there are many means to remove a stump the easiest one is to burn it down. You may think that burning a stump is just like burning a pile of woods, well it is not so. First of all, you must know that a tree has thick and elongated roots. These roots are penetrated very deep in the ground. You cannot eliminate a stump without getting rid of these roots. In this blog, we would guide you on how to burn down a tree stump step by step.

Before you continue there are 3 things that you require to do initially.

1. When wood is dry, it is a lot easier to burn it, so if the stump has actually not yet dried out effectively you must wait up until it has dried.
2. Before you begin the task of tree stump removal in Cabramatta, call your neighborhood fire division to ensure that you will not be breaking any kind of rules concerning burning anything where you live.
3. Also, make sure that the stump is not near any type of combustible structure.

Continue below to see what you'll require this specific method of stump removal.

This method is not recommended for anybody that does not have experience working with open flames and fire. It is additionally never recommended for locations that are completely dry or combustible. If you decide to burn your tree stumps, it is important to follow strict security criteria.

You would need the following items for that purpose:

1. Potassium Nitrate solution
2. 1-Inch Timber Boring Bit or Spade Bit.
3. 8-Inch or 10-Inch Little Bit Extender.
4. Yard Trowel, Shovel, Funnel & Pail
5. Dry Scrap Timber  and Power Drill
6. Warm water, Proper shoes and gloves to keep your hands safe

How to get started:

1. With the help of your drill pierce holes in the stump.
2. Starting at the top-center of the stump, pierce an opening at a 30-degree angle and pierce 10 inches deep.
3. Clean the internal debris and also remain to pierce holes throughout the whole stump, starting from the facility and finishing at the edge.
4. Use your garden trowel to fill each hole with a reasonable amount of potassium nitrate.
5. Now with the help of a funnel, pour hot water inside each whole until the potassium nitrate is completely dissolved in it.
6. Now place the pieces of dry scrap wood on the top of the stump.
7. Now you can set that structure on fire. But remember that you must not use any sort of lighter fluid or gasoline for that purpose.
8. This could take some time, depending upon the size of stump you are burning down. In most cases, the process has to be repeated more than once to attain proper results.

As you have seen it is not difficult but it is more technical than it seems. However, we would recommend that if there are more than one stumps that you want to remove this way, you must get the services of a reputable professional. Such service providers have proper machinery and experience too.